The conveyor Bot

Conveyor-Green 3-Jonah Beri, Daniel Poschel, Peter Craig

This is our idea for a robot conveyor. The robot has one motor that it will use to go forward and backward. The ultrasonic sensor in the front will tell the whole robot to stop when a station puts a bar in front of it. In order for this to work every station is going to need to have a motor controlling a bar on it that will fall when the robot senses the conveyor bot and that will go back up after the topping is applied. It seems pretty complicated but its really not to hard to understand if you think about it. The conveyor will have a peice of wood under it to make sure that the robot goes in a straight line and it will have a light sensor that will sense a piece of tape at the end of the line to know when to go back.
By: Daniel